Acesta este un scurt tutorial menit sa prezinte primii pasi pe care trebuie sa-i faceti pentru a curata computerul de spyware si alte tipuri de malware, folosind Spybot-Search&Destroy.

Desigur, primul lucru pe care va trebui sa-l faceti este sa descarcati Spybot-S&D de pe pagina noastra de download.

Pagina de download va va da mai intai cateva informatii referitoare la donatii. Daca va place acest program, va incurajam sa reveniti si sa donati ceva. Dar acum doriti sa descarcati. Va trebui sa cautati mai jos cu cateva linii si sa dati click pe Spybot - Search & Destroy 1.5. Pe urmatoarea pagina veti vedea un tabel cu patru locatii din care se poate face descarcarea. Dand click pe una din acestea veti fi directionati spre o pagina care ofera descarcarea. Fiecare din aceste pagini este diferita, dar nu ar trebui sa aveti probleme in a gasi linkul pentru descarcare.

Fisierul descarcat va avea numele spybotsd15.exe. Pentru a instala Spybot-S&D, tot ceea ce aveti de facut este sa lansati fisierul si instalarea va incepe (daca descarcarea s-a facut cu Internet Explorer, dialogul de descarcare va va permite sa deschideti fisierul direct). Instalarea va prezenta licenta si va va cere locatia instalarii. Puteti alege setarile implicite, tot ceea ce trebuie sa faceti este sa dati click pe butonul Next.

Dupa ce instalarea s-a efectuat, veti vedea pe desktop si in Start Menu un buton Spybot - Search & Destroy. Dati click pe el pentru a lansa Spybot-S&D pentru prima data.

The first time you start Spybot-S&D, it will display a Wizard, a small window helping you through the first steps. It gives you the possibility to add or remove the icons you have or haven't created during install, for example. Let's just say you want them and proceed to the next page.

If you are using a proxy in Internet Explorer, Spybot-S&D will show you this proxy and a button will give you the opportunity to use it for Spybot-S&D, too. If the text field is blank, you don't need to do it, but in most cases this will show an internet address, and you should import this proxy setting.

The next page deals with updates. It is very important to keep up-to-date. Using the two buttons this page offers will do the updates for you, if you want to do it at a later point, read this.

The last page of the wizard will ask you to read the help file. The help file is always a good resource if you are unsure what to do, so please do at least read the first pages of it.

After the tutorial has finished, you may find yourself on the Settings or Update page. As the default settings are ok right now, and you've already updated, let's ignore them for now and do the first scan.

The left side of the program has a navigation bar that can lead you to all functions of the program. The first section there (the top-most button) is labeled Spybot-S&D and leads you to the main page. Right now, you will see only an empty list and a toolbar at the bottom. The first button in this toolbar is named Check for problems - that is the button you've got to press to start the scanning. Lean back and watch the scan progress.

At this point, you could just jump to point 7, and remove the results. Instead we recommend that you first have a look at what all the stuff is that Spybot-S&D detected. The first thing you should know is to distinguish between the red entries, which represent spyware and similar threats, and the green entries, which are usage tracks.

For the usage tracks (I hope you have followed that link to read what they are), removal is non-critical, but depends on your personal preferences.

Ignoring the usage tracks for now, you should have a look at the red entries which represent the real threats. While you of course can trust us that we have chosen the targets using strict criteria, you can check for yourself if you click on each product and read the product information that will be shown in a pop-up window.

All problems displayed in red are regarded as real threats and should be dealt with. But while you read the product description, you may still decide to keep a threat, or just a usage track. Maybe you don't want your list of most recently used Word documents removed? At this point you have three options.

• You could decide on ignoring all usage tracks. In that case you could open the File sets page on the Settings section of the program, and disable the Usage tracks entries.
• Or if you want to just keep all tracks from a specific product, just right-click a product in the results list.
• Finally, if you want to keep just one file, that is possible the same way.

So now you should know about everything you've found. It's time to use the Fix selected problems button.

Once you start thinking about removing the usage tracks, too, you may think that ticking all the green entries is hard work. This is for a simple reason - to force you, the newbie - to look at the results. Once you know what you are dealing with, there is a hidden Select all button available for you.

If you use Spybot-S&D's realtime protection against spyware, nasty spies will not enter your system. Currently there are three different kinds of protection.

The Immunize function prevents e.g. Tracking Cookies from entering your system. Immunize works with Mozilla Firefox, Internet Explorer and Opera, allowing you to adjust specific settings of the browser to block known spyware installers, (and similar baddies) already included in Spybot-S&D's database. You start the Immunize function by clicking on Spybot-S&D → Immunize on the left navigation bar.

Resident SDHelper is a second layer of protection for IE. Immunize function blocks installers by their ActiveX ID, while SDHelper blocks badware that tries to enter using a different method. Thus Internet Explorer cannot download bad files. You start SDHelper by clicking on Tools → Resident on the left navigation bar (therefore Spybot-S&D has to run in Advanced Mode). There you can tick the checkboxes next to Resident "SDHelper" (Internet Explorer bad download blocker) active in order to activate SDHelper.

Resident TeaTimer prevents unwanted files from being installed – no matter how – on your system. It monitors the processes called/initiated perpetually. If known malicious processes want to start, TeaTimer immediately terminates them, giving you three options how to deal with this process in the future:

• be informed when the process tries to start again
• automatically kill the process
• generally allow the process to run

If something tries to change critical registry keys, TeaTimer will detect it. TeaTimer can protect you against such changes by giving you an option: You can either Allow or Deny the change. TeaTimer is always running in the background.

Since Spybot-S&D 1.6 the TeaTimer uses our database where known files are rated as good or dangerous. This database contains several hundreds of thousands entries and is enlarged continuously. Nonetheless now and then there are files which are not contained yet. In these cases and if you use older Spybot versions Resident TeaTimer will ask your permission for every change. If you are not sure if you should allow the change, there is a simple rule of thumb:

If you have been installing something and/or if you judge the file that is going to be installed as good because you know its name, you can proceed by allowing the registry change (same thing if you or Spybot-S&D were deleting an application). But if the message comes out of the blue sky while you were surfing the web, you should get cautious. In this case it is better to deny the registry change.

You start Resident TeaTimer by clicking on Tools → Resident on the left navigation bar (therefore Spybot-S&D has to run in Advanced Mode). There you can tick the checkboxes next to Resident "TeaTimer" (Protection of over-all system settings) active in order to activate TeaTimer.

Of course it is possible to revise each of your personal decisions. That could be necessary if you have denied some process which turns out as a good one later. You do so by right clicking on the TeaTimer symbol in the system tray - it is the blue one with the lock. (If you cannot see the symbol, it is probably hidden. Just click on the arrows in the system tray to show all hidden symbols.) A window appears where you have to click on Settings to modify your personal lists of registry changes and processes.